Custom Requests can be texted 504-892-1940
3205 Georgia Ave., Kenner , LA 70065
10:30 am - 6:00 pm
Firstmark is a semi-matte high quality PVC vinyl that is easy to cut and easy to weed. Layerable up to 3 layers.
Cut in reverse (mirror).
Weed excess material.
Preheat garment for 2-3 seconds
Press at 300 degrees for 10-15 seconds with medium pressure.
Recommended Cut Settings:
Silhouette: Material Type: Heat Transfer Smooth, Speed: 6, Thickness: 6, Blade: 3
Cricut: Material Type: Iron-on, Speed: 3, Pressure: 3, Blade: 1
Applies to: cotton, polyester, acrylic and similar fabrics.
Care: always respect the garments instructions. Allow 24 hours after application before washing. Iron the backside of the garment only.
Wash: Cold Water. Preferably inside out. Do NOT bleach. Tumble-dry low
**Due to variations in monitors, colors may vary slightly.
Rolls are not always exactly 12" from the manufacturer. Some are approximately +/- 1/4 inch so sheets will also be affected!
Please Note: We are not responsible for issues due to user error including but not limited to not following instructions, melting htv and improper cut settings. If this is the first time you are using our vinyl , please do a test cut before cutting an entire sheet. Our recommended cut settings are a guideline only. Everyone's machine is a bit different so what works for ours may not work for yours.